AV ReceiversMFR-VERIFIED
Sony STR-AN1000
Sony
Checked against your build
This page doesn’t know your build. Open the builder to check this part against the parts you’ve already picked.
Check it in the builder →Where to buy
TRACKED RETAILER OFFERSBest BuyCHECKED 1 DAY AGOFind it →
CrutchfieldCHECKED 1 DAY AGOFind it →
We may earn a commission at no cost to you; it never affects rankings or compatibility verdicts — those come from the data.
Specifications · per-field provenance
● SOURCE-TRACKEDWhere we have it, each spec shows where the data came from.
Channel Config7.2Manufacturer
Main Channels7Manufacturer
Sub Pre Outs2Manufacturer
Zone 2 CapableYesManufacturer
Zone 3 CapableYesManufacturer
Watts Per Channel 6ohm165Manufacturer
THD Percent0.9Manufacturer
Power Measurement Channels Drivenone channel drivenManufacturer
Impedance Range6ohms-16ohmsManufacturer
Impedance Min Ohms6Manufacturer
Impedance Max Ohms16Manufacturer
Dolby AtmosYesManufacturer
Dts XYesManufacturer
Imax EnhancedYesManufacturer
Room Correction SystemSony DCAC IXManufacturer
Measurement Mic IncludedYesManufacturer
HDMI Inputs6Manufacturer
HDMI Outputs2Manufacturer
HDMI Version2.1Manufacturer
HDMI Max Bandwidth Gbps40Retailer
HDMI 21 Port Count4Manufacturer
HDMI Earc Port Count1Manufacturer
Max Passthrough Resolution8K 30
HDR SupportHDR10, Hybrid Log Gamma, Dolby VisionManufacturer
VRR PassthroughYesManufacturer
ALLM SupportYesManufacturer
WifiYesManufacturer
BluetoothYesManufacturer
Airplay2YesManufacturer
Streaming ServicesSpotify ConnectManufacturer
Form Factorfull sizeManufacturer
Width Inches16.9Manufacturer
Height Inches6.1Manufacturer
Depth Inches13Manufacturer
Weight Lbs20.7Manufacturer
Power Consumption W240Manufacturer
Common questions
ANSWERED FROM THE DATACan the Sony STR-AN1000 drive 4-ohm speakers?
Not by its published spec: the Sony STR-AN1000's stated impedance floor is 6Ω, so a speaker that dips below that sits outside the rating. Most receivers tolerate a marginal dip at normal volume, but it's the pairing to verify before buying. Our free builder checks this against the exact parts in your build.
Does the Sony STR-AN1000 support Dolby Atmos?
Yes — the Sony STR-AN1000 decodes Dolby Atmos, per its manufacturer-stated spec (source-tracked in the table above). Real Atmos playback also needs enough amplified channels for a height layer — a 5.1.2 layout takes seven — so match the channel count to your speaker plan.
Computed from this product’s normalized, source-tracked fields — an unstated spec reads as “can’t check”, never as a yes or a no.
Check it against your build →Compared against
HEAD-TO-HEADDenon AVR-X2800HRead the comparison →
Sony STR-AZ1000ESRead the comparison →
Yamaha RX-V6ARead the comparison →
Guides for AV Receivers
BUYING ADVICEThe best budget AV receivers for Dolby AtmosRead the guide →
How much receiver power do you actually need?Read the guide →
Denon receiver models: S vs X series comparedRead the guide →
More AV Receivers
SAME DEPARTMENTDenon AVR-S980H$949
Onkyo TX-NR6100$900
Onkyo TX-RZ30$970
Yamaha RX-V6A$850
Sony STR-DH790$550
Sony STR-DH590$500
Denon AVR-X1800H$849