SpeakersMFR-VERIFIED

ELAC Solano 2.0 CC281.2

ELAC

Price

price unknown

No tracked price or list price for this model yet

Add to build

Checked against your build

This page doesn’t know your build. Open the builder to check this part against the parts you’ve already picked.

Check it in the builder →

Where to buy

NO TRACKED OFFERS

Priceunknown — no tracked offers or list price yet

We may earn a commission at no cost to you; it never affects rankings or compatibility verdicts — those come from the data.

Specifications · per-field provenance

● SOURCE-TRACKED

Where we have it, each spec shows where the data came from.

Speaker Typecenter channelManufacturer

Intended RolescenterManufacturer

Way Config2.5-wayManufacturer

Woofer Count2Manufacturer

Woofer Size Inches5.9Manufacturer

Tweeter TypeAMT folded ribbonManufacturer

Impedance Nominal Ohms4Manufacturer

Impedance Minimum Ohms3.6Manufacturer

Sensitivity DB 1w1m87.5Manufacturer

Sensitivity Measurement ContextunstatedManufacturer

Freq Response Low HZ34Manufacturer

Freq Response High HZ50000Manufacturer

Freq Response ToleranceunstatedManufacturer

Recommended Power Min W40Manufacturer

Recommended Power Max W250Manufacturer

Peak Power Handling W160Manufacturer

Crossover Frequency HZ2400Manufacturer

Enclosure Typebass reflex portedManufacturer

Height Inches7.5Manufacturer

Width Inches19.7Manufacturer

Depth Inches9.8Manufacturer

Weight Lbs26.5Manufacturer

Finish OptionsBlack High Gloss, White High GlossManufacturer

How we verify these specs →Spotted a wrong spec? Report a correction →

Common questions

ANSWERED FROM THE DATA

What receiver do you need to drive the ELAC Solano 2.0 CC281.2?

The ELAC Solano 2.0 CC281.2 is rated at 87.5 dB sensitivity (on the hungrier side, so amplifier headroom matters) and dips to a stated 3.6Ω minimum — pick a receiver explicitly rated for low-impedance loads. Our free builder checks this against the exact parts in your build.

Computed from this product’s normalized, source-tracked fields — an unstated spec reads as “can’t check”, never as a yes or a no.

Check it against your build →