SpeakersMFR-VERIFIED
Bowers & Wilkins 705 S3
Bowers & Wilkins
Checked against your build
This page doesn’t know your build. Open the builder to check this part against the parts you’ve already picked.
Check it in the builder →Where to buy
TRACKED RETAILER OFFERSBest BuyCHECKED 6 WEEKS AGOFind it →
Bowers & WilkinsCHECKED 6 WEEKS AGOFind it →
We may earn a commission at no cost to you; it never affects rankings or compatibility verdicts — those come from the data.
Specifications · per-field provenance
● SOURCE-TRACKEDWhere we have it, each spec shows where the data came from.
Speaker Typebookshelf standmountEstimated
Way Config2-wayManufacturer
Woofer Count1Manufacturer
Woofer Size Inches6.5Manufacturer
Tweeter Typecarbon domeManufacturer
Tweeter Size Inches1Manufacturer
Impedance Nominal Ohms8Manufacturer
Impedance Minimum Ohms3.7Manufacturer
Sensitivity DB 1w1m88Manufacturer
Sensitivity Measurement ContextunstatedManufacturer
Freq Response Low HZ50Manufacturer
Freq Response High HZ28000Manufacturer
Freq Response Toleranceplus minus 3dBManufacturer
Recommended Power Min W30Manufacturer
Recommended Power Max W120Manufacturer
Enclosure Typebass reflex portedManufacturer
Height Inches13.6Manufacturer
Width Inches7.6Manufacturer
Depth Inches11.7Manufacturer
Weight Lbs21.1Manufacturer
Sold AspairManufacturer
Finish OptionsGloss black, Satin white, Mocha, Rosenut (APAC only)Manufacturer
Common questions
ANSWERED FROM THE DATAWhat receiver do you need to drive the Bowers & Wilkins 705 S3?
The Bowers & Wilkins 705 S3 is rated at 88 dB sensitivity (about average to drive) and dips to a stated 3.7Ω minimum — pick a receiver explicitly rated for low-impedance loads. Our free builder checks this against the exact parts in your build.
How much do the Bowers & Wilkins 705 S3 cost as a pair?
$3,800 for the left/right pair at today's tracked price. Retailers list some speakers per unit and some per pair without saying so loudly — we normalize every price on this site to what the pair actually costs.
Computed from this product’s normalized, source-tracked fields — an unstated spec reads as “can’t check”, never as a yes or a no.
Check it against your build →Guides for Speakers
BUYING ADVICEThe best bookshelf speakers for home theaterRead the guide →
Speaker sensitivity and impedance, explainedRead the guide →
Speaker placement: the free upgrade most rooms are missingRead the guide →