← Back to AV Receivers
AV ReceiversMFR-VERIFIED

Denon AVR-X2900H

Denon

Price

$1,349
Best price today at denon.com

Checked against your build

This page doesn’t know your build. Open the builder to check this part against the parts you’ve already picked.
Check it in the builder →
Denon AVR-X2900H

Where to buy

TRACKED RETAILER OFFERS
denon.comCHECKED TODAY$1,349 →
We may earn a commission at no cost to you; it never affects rankings or compatibility verdicts — those come from the data.

Specifications · per-field provenance

● SOURCE-TRACKED
Channel Config7.2
Main Channels7
Processing Channels7
Sub Pre Outs2
Zone 2 CapableYes
Watts Per Channel 8ohm95
Watts Per Channel 6ohm125
THD Percent0.08
Power Measurement Channels Driventwo channels driven
Dolby AtmosYes
Dts XYes
Room Correction SystemAudyssey MultEQ XT
Measurement Mic IncludedYes
HDMI Inputs6
HDMI Outputs2
HDMI Earc Port Count1
HDR SupportHDR10, HLG, Dynamic HDR, HDR10+, Dolby Vision
VRR PassthroughYes
ALLM SupportYes
Phono InputYes
HeosYes
Streaming ServicesSpotify Connect
Width Inches17.1
Height Inches6.6
Depth Inches13
Weight Lbs21.4
Power Consumption W500
Green dot = lab-measured · amber = manufacturer-verified · blue = retailer/community-reported · grey = estimated
How we verify these specs →Spotted a wrong spec? Report a correction →

Common questions

ANSWERED FROM THE DATA

Can the Denon AVR-X2900H drive 4-ohm speakers?

It can't be verified from the spec sheet: the Denon AVR-X2900H publishes no rated speaker-impedance range in our data, and we treat a missing rating as "can't check" — never as a yes. Our free builder checks this against the exact parts in your build.

Does the Denon AVR-X2900H support Dolby Atmos?

Yes — the Denon AVR-X2900H decodes Dolby Atmos, per its manufacturer-stated spec (source-tracked in the table above). Real Atmos playback also needs enough amplified channels for a height layer — a 5.1.2 layout takes seven — so match the channel count to your speaker plan.

How much power does the Denon AVR-X2900H deliver?

Its stated rating is 95W per channel into 8Ω. Wattage figures are only comparable when the measurement conditions match — channels driven, impedance, and distortion threshold all move the number — so compare like-for-like; our catalog stores those conditions with the value instead of just the sticker.

Computed from this product’s normalized, source-tracked fields — an unstated spec reads as “can’t check”, never as a yes or a no.
Check it against your build →

Guides for AV Receivers

BUYING ADVICE
The best budget AV receivers for Dolby AtmosRead the guide →
How much receiver power do you actually need?Read the guide →
Denon receiver models compared: the S series vs the X seriesRead the guide →