← Back to AV Receivers
AV ReceiversMFR-VERIFIED

Denon AVR-S670H

Denon

Price

$649
Best price today at denon.com

Checked against your build

This page doesn’t know your build. Open the builder to check this part against the parts you’ve already picked.
Check it in the builder →
Denon AVR-S670H

Where to buy

TRACKED RETAILER OFFERS
denon.comCHECKED TODAY$649 →
We may earn a commission at no cost to you; it never affects rankings or compatibility verdicts — those come from the data.

Specifications · per-field provenance

● SOURCE-TRACKED
Channel Config5.2
Main Channels5
Processing Channels6
Sub Pre Outs2
Watts Per Channel 8ohm75
Watts Per Channel 6ohm100
THD Percent0.08
Power Measurement Channels Driventwo channels driven
Dolby AtmosNo
Dts XNo
Room Correction SystemAudyssey MultEQ
HDMI Inputs6
HDMI Outputs1
HDMI Version2.1
HDMI Max Bandwidth Gbps40
HDMI Earc Port Count1
Max Passthrough Resolution8K 60
HDR SupportDolby Vision, HDR10+, Dynamic HDR, HLG
VRR PassthroughYes
ALLM SupportYes
Phono InputYes
WifiYes
BluetoothYes
Airplay2Yes
HeosYes
Ip ControlYes
Streaming ServicesSpotify Connect, Tidal Connect, Deezer, TuneIn
Form Factorfull size
Width Inches17.1
Height Inches6
Depth Inches13.3
Weight Lbs17.2
Power Consumption W340
Green dot = lab-measured · amber = manufacturer-verified · blue = retailer/community-reported · grey = estimated
How we verify these specs →Spotted a wrong spec? Report a correction →

Common questions

ANSWERED FROM THE DATA

Can the Denon AVR-S670H drive 4-ohm speakers?

It can't be verified from the spec sheet: the Denon AVR-S670H publishes no rated speaker-impedance range in our data, and we treat a missing rating as "can't check" — never as a yes. Our free builder checks this against the exact parts in your build.

Does the Denon AVR-S670H support Dolby Atmos?

No — the spec sheet states no Dolby Atmos support for the Denon AVR-S670H. No firmware or extra speakers change that; if Atmos is the goal, pick a receiver that decodes it.

How much power does the Denon AVR-S670H deliver?

Its stated rating is 75W per channel into 8Ω. Wattage figures are only comparable when the measurement conditions match — channels driven, impedance, and distortion threshold all move the number — so compare like-for-like; our catalog stores those conditions with the value instead of just the sticker.

Computed from this product’s normalized, source-tracked fields — an unstated spec reads as “can’t check”, never as a yes or a no.
Check it against your build →

Guides for AV Receivers

BUYING ADVICE
The best budget AV receivers for Dolby AtmosRead the guide →
How much receiver power do you actually need?Read the guide →
Denon receiver models compared: the S series vs the X seriesRead the guide →