← Back to AV Receivers
AV ReceiversMFR-VERIFIED

Denon AVR-A10H

Denon

Price

$5,199
Best price today at denon.com

Checked against your build

This page doesn’t know your build. Open the builder to check this part against the parts you’ve already picked.
Check it in the builder →
Denon AVR-A10H

Where to buy

TRACKED RETAILER OFFERS
denon.comCHECKED TODAY$5,199 →
We may earn a commission at no cost to you; it never affects rankings or compatibility verdicts — those come from the data.

Specifications · per-field provenance

● SOURCE-TRACKED
Channel Config13.4
Main Channels13
Processing Channels17
Sub Pre Outs4
Zone 2 CapableYes
Zone 3 CapableYes
Watts Per Channel 8ohm150
Watts Per Channel 6ohm190
THD Percent0.05
Power Measurement Channels Driventwo channels driven
Dolby AtmosYes
Dts XYes
Auro 3dYes
Imax EnhancedYes
Room Correction SystemAudyssey MultEQ XT32
HDMI Inputs7
HDMI Outputs3
HDMI Earc Port Count1
Max Passthrough Resolution8K 60
HDR SupportHDR10+, HLG, Dynamic HDR
VRR PassthroughYes
ALLM SupportYes
Phono InputYes
HeosYes
Width Inches17.1
Height Inches7.7
Depth Inches18.6
Weight Lbs52
Power Consumption W900
Green dot = lab-measured · amber = manufacturer-verified · blue = retailer/community-reported · grey = estimated
How we verify these specs →Spotted a wrong spec? Report a correction →

Common questions

ANSWERED FROM THE DATA

Can the Denon AVR-A10H drive 4-ohm speakers?

It can't be verified from the spec sheet: the Denon AVR-A10H publishes no rated speaker-impedance range in our data, and we treat a missing rating as "can't check" — never as a yes. Our free builder checks this against the exact parts in your build.

Does the Denon AVR-A10H support Dolby Atmos?

Yes — the Denon AVR-A10H decodes Dolby Atmos, per its manufacturer-stated spec (source-tracked in the table above). Real Atmos playback also needs enough amplified channels for a height layer — a 5.1.2 layout takes seven — so match the channel count to your speaker plan.

How much power does the Denon AVR-A10H deliver?

Its stated rating is 150W per channel into 8Ω. Wattage figures are only comparable when the measurement conditions match — channels driven, impedance, and distortion threshold all move the number — so compare like-for-like; our catalog stores those conditions with the value instead of just the sticker.

Computed from this product’s normalized, source-tracked fields — an unstated spec reads as “can’t check”, never as a yes or a no.
Check it against your build →

Guides for AV Receivers

BUYING ADVICE
The best budget AV receivers for Dolby AtmosRead the guide →
How much receiver power do you actually need?Read the guide →
Denon receiver models compared: the S series vs the X seriesRead the guide →