← Back to Speakers
SpeakersMFR-VERIFIED

KEF Q1 Meta

KEF
$700
Best price today at Abt
Checked against your build
This page doesn’t know your build. Open the builder to check this part against the parts you’ve already picked.
Check it in the builder →
KEF Q1 Meta
Where to buyTRACKED RETAILER OFFERS
Best BuyCHECKED TODAY$700 →
CrutchfieldCHECKED TODAY$700 →
AbtCHECKED TODAY$700 →
World Wide StereoCHECKED TODAY$700 →
ListenUpCHECKED TODAY$700 →
Electronics ExpoCHECKED TODAY$700 →
us.kef.comCHECKED TODAY$700 →
We may earn a commission at no cost to you; it never affects rankings or compatibility verdicts — those come from the data.
Specifications · per-field provenance● SOURCE-TRACKED
Speaker Typebookshelf standmount
Way Config2-way
Woofer Count1
Woofer Size Inches5.25
Tweeter Typealuminum dome
Tweeter Size Inches1
Impedance Nominal Ohms4
Impedance Minimum Ohms3.2
Sensitivity DB 1w1m86
Sensitivity Measurement Contextunstated
Freq Response Low HZ51
Freq Response High HZ20000
Freq Response Toleranceplus minus 3dB
Recommended Power Min W10
Recommended Power Max W150
Crossover Frequency HZ2100
Enclosure Typebass reflex ported
Grille IncludedYes
Height Inches11.9
Width Inches7.1
Depth Inches10.9
Weight Lbs13.4
Sold Aspair
Finish OptionsSatin Black, Satin White, Walnut
Green dot = lab-measured · amber = manufacturer-verified · blue = retailer/community-reported · grey = estimated
How we verify these specs →Spotted a wrong spec? Report a correction →
Common questionsANSWERED FROM THE DATA

What receiver do you need to drive the KEF Q1 Meta?

The KEF Q1 Meta is rated at 86 dB sensitivity (on the hungrier side, so amplifier headroom matters) and dips to a stated 3.2Ω minimum — pick a receiver explicitly rated for low-impedance loads. Our free builder checks this against the exact parts in your build.

How much do the KEF Q1 Meta cost as a pair?

$700 for the left/right pair at today's tracked price. Retailers list some speakers per unit and some per pair without saying so loudly — we normalize every price on this site to what the pair actually costs.

Computed from this product’s normalized, source-tracked fields — an unstated spec reads as “can’t check”, never as a yes or a no.
Check it against your build →